English English 
 |
| Quantity: | |
|---|---|
Specification parameters
1. Thickness: The thickness is normally 30-50 microns, can be customized made within the range of 30-80 microns.
2. Colour: Commonly made with high transparency, can be another single colour as requested.
3. Width: The width is normally 1000-1300mm, can be cut into narrow widths like 100/200/500mm.
4. Length: 200/400/500/1000/2000 meter per roll.
5. Adhesion: 0.5-300g/25mm
6. Elongation: >200%
7. Temperature resistance: Ok with temperature below 70-degree Celsius, if you need the film resist high temperature over 70 DC, please check with other film series.
8. Material use: It is made with 100% purity new LDPE material as the substrate.
The material of the film can be used in following industries:
1. Used for all kinds of plastic sheet and injection parts surface protection: such as PP, PVC, ABS, PC, PMMA, PA, PS sheet/board/frame materials, self-adhesive or electrostatic adsorption on the high gloss surface for protection.
2. Suitable for all kinds of aluminium alloy, aluminium foil, copper foil, tin foil, stainless steel, galvanized sheet, and anodized surface for anti-dust protection.
3. Suitable for all kinds of plexiglass, inorganic glass, artificial crystal, handicraft surface dustproof fingerprint protection.
4. It is suitable for all kinds of painting parts, oil spraying parts shielding and colour protection.
5. Can be used for LCD display, backlight panel, cold light panel, light guide panel, film switch and mobile phone screen protection.
Instructions for use
1. The surfaces to be protected should be dry, free from dust, oil, solvents, or other chemicals in case of any residue is caused by the chemical reaction with our film adhesive.
2. The best results are obtained with temperature of surface and surroundings at +15°C to 40°C.
3. Use laminating machines with rubber coated press rollers.
4. Try to eliminate or minimize film elongation, and the formation of air bubbles and folds during lamination.
5. Removing the film is advisable to perform in the temperature range 5°C to 40°C (Not below 5°C).
6. The film is not suitable for extreme thermoforming.
Our area of service is vast, and we are proud to deliver the best of products
1. Electronic industry: Hualibao Co., Ltd. manufactures LCD liquid crystal display, backlight board, cold light film, membrane switch, mobile phone screen and so on. In production, the finished products and semi-finished products are generally used to protect the finished products and semi-finished products, and it is not easy to be scratched and damaged on the assembly line!
2. Home appliance industry: Hualibao Co., Ltd. produces computer case, galvanized sheet stamping, aluminium sheet, stainless steel sheet, titanium sheet, plastic steel, glass sheet, solar panel, etc.
3. Construction industry: Hualibao Co., Ltd. manufactures aluminium profiles, stainless steel plate, plastic aluminium plate, plastic steel and so on, making it a leading electrostatic film manufacturer.
4. Plastic industry: Hualibao Co., Ltd. produces ABS, PP injection products, PVC boards, acrylic panels, instrument panels, plastic lenses, surface protection of painted parts, etc. making a leading electrostatic film manufacturer.
5. Printing industry: Hualibao Co., Ltd. manufactures PVC, PC board, aluminium plate, film, and other printing nameplate surface protection, etc.
6. Wire and cable industry: Hualibao Co., Ltd. manufactures the protection of shaft-mounted copper wires, semi-finished products, finished products, and rolled finished products can effectively prevent dust pollution, and have anti-oxidation and anti-dirt effects.
 Electrostatic Film Electrostatic film is actually made with a kind of electrostatic fluid, co-extruded on the surface of original PE film, to play a role of adhesion. People also name it as self-absorptive film, self-adhered tape, non glue film or non-gel film. Electrostatic protection film use the electrostatic adsorption force as the self adhesive force, no glue,small adhesion force variation, easy to peel off. |
Material use
It is made with 100% purity new LDPE material as the substrate. It can be used in following industries:
1. Used for all kinds of plastic sheet and injection parts surface protection: such as PP, PVC, ABS, PC, PMMA, PA, PS sheet/board/frame materials, self-adhesive or electrostatic adsorption on the high gloss surface for protection.
2, suitable for all kinds of aluminum alloy, aluminum foil, copper foil, tin foil, stainless steel, galvanized sheet and anodized surface for anti-dust protection.
3, suitable for all kinds of plexiglass, inorganic glass, artificial crystal, handicraft surface dustproof fingerprint protection.
4. It is suitable for all kinds of painting parts, oil spraying parts shielding and color protection.
5. LCD display, backlight panel, cold light panel, light guide panel, film switch and mobile phone screen protection.
Specification parameters
1. Thickness: The thickness is normally 30-50 microns, can be customized made within the range of 30-80 microns.
2. Colour: Commonly made with high transparency, can be another single colour as requested.
3. Width: The width is normally 1000-1300mm, can be cut into narrow widths like 100/200/500mm.
4. Length: 200/400/500/1000/2000 meter per roll.
5. Adhesion: 0.5-300g/25mm
6. Elongation: >200%
7. Temperature resistance: Ok with temperature below 70-degree Celsius, if you need the film resist high temperature over 70 DC, please check with other film series.
8. Material use: It is made with 100% purity new LDPE material as the substrate.
The material of the film can be used in following industries:
1. Used for all kinds of plastic sheet and injection parts surface protection: such as PP, PVC, ABS, PC, PMMA, PA, PS sheet/board/frame materials, self-adhesive or electrostatic adsorption on the high gloss surface for protection.
2. Suitable for all kinds of aluminium alloy, aluminium foil, copper foil, tin foil, stainless steel, galvanized sheet, and anodized surface for anti-dust protection.
3. Suitable for all kinds of plexiglass, inorganic glass, artificial crystal, handicraft surface dustproof fingerprint protection.
4. It is suitable for all kinds of painting parts, oil spraying parts shielding and colour protection.
5. Can be used for LCD display, backlight panel, cold light panel, light guide panel, film switch and mobile phone screen protection.
Instructions for use
1. The surfaces to be protected should be dry, free from dust, oil, solvents, or other chemicals in case of any residue is caused by the chemical reaction with our film adhesive.
2. The best results are obtained with temperature of surface and surroundings at +15°C to 40°C.
3. Use laminating machines with rubber coated press rollers.
4. Try to eliminate or minimize film elongation, and the formation of air bubbles and folds during lamination.
5. Removing the film is advisable to perform in the temperature range 5°C to 40°C (Not below 5°C).
6. The film is not suitable for extreme thermoforming.
Our area of service is vast, and we are proud to deliver the best of products
1. Electronic industry: Hualibao Co., Ltd. manufactures LCD liquid crystal display, backlight board, cold light film, membrane switch, mobile phone screen and so on. In production, the finished products and semi-finished products are generally used to protect the finished products and semi-finished products, and it is not easy to be scratched and damaged on the assembly line!
2. Home appliance industry: Hualibao Co., Ltd. produces computer case, galvanized sheet stamping, aluminium sheet, stainless steel sheet, titanium sheet, plastic steel, glass sheet, solar panel, etc.
3. Construction industry: Hualibao Co., Ltd. manufactures aluminium profiles, stainless steel plate, plastic aluminium plate, plastic steel and so on, making it a leading electrostatic film manufacturer.
4. Plastic industry: Hualibao Co., Ltd. produces ABS, PP injection products, PVC boards, acrylic panels, instrument panels, plastic lenses, surface protection of painted parts, etc. making a leading electrostatic film manufacturer.
5. Printing industry: Hualibao Co., Ltd. manufactures PVC, PC board, aluminium plate, film, and other printing nameplate surface protection, etc.
6. Wire and cable industry: Hualibao Co., Ltd. manufactures the protection of shaft-mounted copper wires, semi-finished products, finished products, and rolled finished products can effectively prevent dust pollution, and have anti-oxidation and anti-dirt effects.
Electrostatic Film Electrostatic film is actually made with a kind of electrostatic fluid, co-extruded on the surface of original PE film, to play a role of adhesion. People also name it as self-absorptive film, self-adhered tape, non glue film or non-gel film. Electrostatic protection film use the electrostatic adsorption force as the self adhesive force, no glue,small adhesion force variation, easy to peel off. |
Material use
It is made with 100% purity new LDPE material as the substrate. It can be used in following industries:
1. Used for all kinds of plastic sheet and injection parts surface protection: such as PP, PVC, ABS, PC, PMMA, PA, PS sheet/board/frame materials, self-adhesive or electrostatic adsorption on the high gloss surface for protection.
2, suitable for all kinds of aluminum alloy, aluminum foil, copper foil, tin foil, stainless steel, galvanized sheet and anodized surface for anti-dust protection.
3, suitable for all kinds of plexiglass, inorganic glass, artificial crystal, handicraft surface dustproof fingerprint protection.
4. It is suitable for all kinds of painting parts, oil spraying parts shielding and color protection.
5. LCD display, backlight panel, cold light panel, light guide panel, film switch and mobile phone screen protection.
